Skelton, Kim wrote:
>>>I am batch digitizing a piece from a TAO box.
Batching with the TAO is a b-tch sometimes.
The time code error messages probably have something to do with the transport over LANC and the TAO rather than software settings on the Xpress.
Try This: If the TAO works with a single clip, while NOT using Batch Digitize, my guess is that you need a New/different Eprom which is designed for versions including Xpress 2.2
I remember using a TAO box on a Media Composer with no problems what-so-ever during batch digitize, but hearing reports like yours when the same unit was used on an Xpress 2.1
After a "2.1 ready" rom was installed, there were no problems during batch digitize on either system.
>> I am using the supplied template and have been able to do so before
Was that before you uprgaded to 2.2? Call TAO's tech support-- they are great and fully support their product.
Matt D.
>>>>>>>
I am using the supplied
template and have been able to do so before. The system is Xpress 2.2 with
OS 8.6.
While trying to batch I get this message. "Digitizing aborted due to
discontinuity in time code or because material is too complex."
I feel that this has to do with the time code itself. I have on the
digitize window 01;00;00. On the Canon XL1 the time code is 01:00: etc.. I
feel that I need to change the time code from the semi colon to the colon
but, I can not for the life of me remember how. Could someone please
refresh my memory.
This is worth about 100 points!
Kim Skelton
Media Coordinator
Smullin Health Center / Asante Health System
kskelton@asante.org
541-608-5915
fax 541-680-5853
This archive was generated by hypermail 2b29 : Tue Apr 18 2000 - 11:04:52 EDT